Myślisz, że wymiatasz jeśli chodzi o NBA? Sprawdź się z innymi pasjonatami koszykówki. Odwiedź NBA QUIZ i wykaż się wiedzą!

Odpowiedz 
 
Ocena wątku:
  • 0 Głosów - 0 Średnio
  • 1
  • 2
  • 3
  • 4
  • 5
Process defects of traditional production of grinding wheels
24-10-2018, 08:32
Post: #1
Process defects of traditional production of grinding wheels
Due to objective technical reasons, most of the domestic and foreign countries use traditional knife bowls for turning. In the process of processing it, 4.5 inches grinding wheel drives the quenched 45th steel thin-walled knife bowl to rotate at a higher linear velocity (300-400 m/min), and carries the cutter to remove the excess amount of the grinding wheel. Due to the high-speed rotation of the processed 4.5 inches grinding wheel and the knife bowl, the dust and noise in the processing are large, the cutting depth and the feed amount are small, so the processing efficiency is low and the comprehensive cost is high, and the operator is labor intensive.

If a large-grain diamond cutter is used, it is expensive, and because the diamond has low bending strength, it is easily damaged during cutting, and the cutting depth and the feed amount when cutting the 4.5 inches grinding wheel are small, and it is generally used only in finishing.
Znajdź wszystkie posty użytkownika
Odpowiedz cytując ten post
Odpowiedz 


Podobne wątki
Wątek: Autor Odpowiedzi: Wyświetleń: Ostatni post
  The difference between grinding wheel and shallow saw blade juniperqq 0 68 16-11-2018 10:48
Ostatni post: juniperqq
  Different before and after the grinding disc is used juniperqq 0 80 05-11-2018 08:48
Ostatni post: juniperqq
  What Is Grinding Wheel For Stainless Steel juniperqq 0 68 02-11-2018 08:52
Ostatni post: juniperqq
  Grinding disc grinding factor juniperqq 0 76 01-11-2018 08:16
Ostatni post: juniperqq
  Electroplated diamond long life grinding wheel advantages juniperqq 0 78 31-10-2018 08:30
Ostatni post: juniperqq
  Classification of diamond wheels juniperqq 0 73 30-10-2018 07:52
Ostatni post: juniperqq
  Introduction to wear characteristics of grinding wheel juniperqq 0 58 29-10-2018 12:08
Ostatni post: juniperqq
  What is the cause of the blockage of the grinding wheel? juniperqq 0 84 25-10-2018 08:34
Ostatni post: juniperqq
  Reasons and solutions for the breakdown of grinding wheels (Part Two) juniperqq 0 90 23-10-2018 10:24
Ostatni post: juniperqq
  Abrasives of grinding wheels juniperqq 0 79 22-10-2018 10:04
Ostatni post: juniperqq

Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości